|
|
SYNTHETIC CIS-ISOPRENE RUBBER
SKI-3
SKI-3 is a synthetic isoprene rubber with cis-1, 4 chains CAS Number: 26702-92-1
content of at least 96%. It can be used independently or in
Composition with other rubbers for production of tires,
Different kinds of rubber-technical articles, rubber footwear Design GOST 14925-79
sports equipment, bitumen mastics and water-repellent specification:
Mixtures.
|
| PROPERTY |
VALUE |
TEST METHOD |
| |
Group I Group II |
|
| Mooney Viscosity,ML1+4(100oC) |
75-85 65-74 |
para.4.2 of GOST |
| Viscosity spread in one lot |
8 8 |
para.4.2 of GOST |
| Plasticity |
0.30-0.35 0.36-0.41 |
para.4.3 of GOST |
| Plasticity spread in one lot,max. |
0.05 0.05 |
para.4.3 of GOST |
| Elastic recovery after determination of plasticity, mm, max. |
1.8 1.7 |
para.4.3 of GOST |
| Tensile strength, MPa(kgF/cm2), min: |
|
para.4.4. of GOST |
| at 23oC |
30.4(310) 30.4(310) |
|
| at 100oC |
21.6(220) 21.6(220) |
|
| Ultimate elongation, %,min. |
800 800 |
para.4.4 of GOST |
| Ash mass content,%,max. |
0.5 0.5 |
para.4.5 of GOST |
| Metals mass content,%,max.: |
|
para.4.6 of GOST |
| Copper |
0.0001 0.0001 |
|
| Lron |
0.004 0.004 |
|
| Titanium |
0.06 0.06 |
|
| Loss of mass at drying,%,max. |
0.6 0.6 |
para.4.7 of GOST |
| Stearic acid mass content, % |
0.6-1.4 0.6-1.4 |
para.4.8 of GOST |
| Antjoxidant mass contert, %, min.: |
|
para.4.10.5 of GOST |
| Diphenyl n-Phenylenediamine |
0.15 0.15 |
|
| Dusantox L |
0.2 0.2 |
|
| or Flexzone 11L |
0.2 0.2 |
|
| or Santoflex 134 PD |
0.2 0.2 |
|
| AFA-1 |
0.7 0.7 |
|
Supply form: 30＼1kg bales.
Packaging: Polyethylene film, paper bags, wooden pallet boxes, special containers.As per customer Requirements bale packing in two layers of film is possible.
Transportation: Product in pallet boxes is transported in covered wagons and large capacity containers withBatching.Product in paper bags is transported without batching.
Storage: Storage in warehouses away from direct sunrays,atmospheric precipitation and
Contamination at temperature not exceeding 30≧. |
Information contained in this document is provided to the best of our knowledge and is considered true as per 06.12.2007.This specification does not release the customer from obligation to check the product as to its suitability for intended area of usage.We do not accept any liability for loss and damage that may occur from the use of this information. |
|
